From: Eric Fairfield (ericfair@xxxxxxxxxx)
Date: Tue Nov 07 2000 - 08:53:50 GMT-3
Either inject a default route via IPX Rip or use EIGRP and turn
Split-Horizon Off
----- Original Message -----
From: Ronnie Royston <RonnieR@globaldatasys.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, November 07, 2000 12:31 AM
Subject: IPX RIP - Can't see a remote site
> I have the following:
> ______R2
> /
> R1---<
> \______R3---------R4
>
> IPX RIP is running. R1 sees everything. R2 sees only R1. R3 sees
> everything but R2. R4 sees everything but R2. It looks like maybe a
split
> horizon issue but I know for IP, frame interfaces automatically disable
> split except for p-to-p subint's. I can't find a split horizon command
> under 'no ipx ?' or 'ipx router rip ?'. Originally, I had FR map
statements
> on R1s major Se int. I tried moving the config to a multipoint
> subinterface. Still no luck. Anybody know whassup?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:42 GMT-3