Re: RIP default routes (& default-information originate)

From: Fred Ingham (fningham@xxxxxxxxxxxxxxxx)
Date: Mon Nov 06 2000 - 16:48:03 GMT-3

• Next message: Justin Menga: "RE: IP NAT Inside Source Static"
• Previous message: Justin Menga: "RE: Cisco IOS VPN and Firewall"
• Next in thread: Fred Ingham: "Re: RIP default routes (& default-information originate)"
• Maybe reply: Fred Ingham: "Re: RIP default routes (& default-information originate)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
The following produces a default route for rip in r4. The configuration
is on r1. r1 and r4 are connected via frame relay with a /24 subnet.
Other routers are running OSPF.

r1:
router rip
 redistribute ospf 1 metric 3
 passive-interface Serial0/0.123
 network 172.16.0.0
 default-information originate

r4:
router rip
 network 172.16.0.0
 network 172.17.0.0
!
ip classless

hth, Fred.

• Next message: Justin Menga: "RE: IP NAT Inside Source Static"
• Previous message: Justin Menga: "RE: Cisco IOS VPN and Firewall"
• Next in thread: Fred Ingham: "Re: RIP default routes (& default-information originate)"
• Maybe reply: Fred Ingham: "Re: RIP default routes (& default-information originate)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:42 GMT-3