From: Wu,Jiang (wujiang@xxxxxxxxx)
Date: Mon Nov 06 2000 - 11:20:33 GMT-3
Be sure the VPN traffic is not translated by the firewall. Or should you change
your IPSEC configuration.
Hope that helps.
Wu
----- Original Message -----
From: Horvath, Russell <Russell.Horvath@viatel.com>
To: group study <ccielab@groupstudy.com>
Sent: Monday, November 06, 2000 8:08 PM
Subject: Cisco IOS VPN and Firewall
> Anyone,
> I am trying to get IPSEC running through a PIX firewall. The
> situ is:
>
> 1. 1750 IPSEC configured
> 2. FIREWALL NAT
> 3. Client PC
>
> I have got IPSEC running OK between a PC and the 1750 without running it
> through the firewall so I know my configs are OK.
>
> However when I stick the PIX in between it fails. I have configured the PIX
> with a conduit for the PC. Is there anything else it should have?
>
> Does anyone know if you can run IPSEC through a PIX Firewall. I don't want
> to terminate on the actual PIX but actually run through it.
>
> Any takers......
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:42 GMT-3