From: Chad Sullivan (ChSulliv@xxxxxxxxx)
Date: Sun Nov 05 2000 - 22:42:39 GMT-3
Have you included the interface under IPX ROUTER NLSP?
distribute-sap-list 1010 out Ethernet0
Where:
access-list 1010 deny FF33FF 7 ServerON3
access-list 1010 permit FFFFFFFF 0
after a bit the sap entry times out(as below)
FIRST:
Type Name Net Address Port Route Hops
Itf
E 4 FileServer BB66BB.0066.1234.0004:0004 2323456/01 2
Se0
N 7 ServerON3 FF33FF.0033.1234.5678:0007 10/01 2
Et0
THEN:(with list applied)
Type Name Net Address Port Route Hops
Itf
E 4 FileServer BB66BB.0066.1234.0004:0004 2323456/01 1
Se0
N 7 ServerON3 FF33FF.0033.1234.5678:0007
FINALLY:
Type Name Net Address Port Route Hops
Itf
E 4 FileServer BB66BB.0066.1234.0004:0004 2323456/01 1
Se0
--Chad
--Nov 13/14 RTP
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Justin Menga
Sent: Sunday, November 05, 2000 4:18 PM
To: 'John Conzone'; ccielab
Subject: RE: NLSP sap filtering
Yes - I am having the same problem with NLSP. I have tried using
distribute-sap-list and also the ipx input-sap-filter/output-sap-filter
options.
I'll try and figure this out and let you know....
Regards,
Justin Menga MCSE+I CCNP CCSE ASE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
-----Original Message-----
From: John Conzone [mailto:jkconzone@home.com]
Sent: Saturday, 4 November 2000 10:09 a.m.
To: ccielab
Subject: NLSP sap filtering
Having a probelm filtering sap bewteen two routers running NLSP. Have
tried distrbute-sap-list out on interface, no work.
Anyone run into this?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:42 GMT-3