From: John Conzone (jkconzone@xxxxxxxx)
Date: Sat Nov 04 2000 - 13:02:34 GMT-3
They are pretty easy going in the lab. They tell you what NOT to do.
Anything else is okay!
If you're still not sure, ask the proctor. I've been twice and I've had
no trouble whatsoever figuring out what not to do. If it accomplishes the
task, and is not expressly forbidden, its oaky!
----- Original Message -----
From: "Robert DeVito" <robertdevito@hotmail.com>
To: <aolzak@buckeye-express.com>; <lpd@jacksonville.net>;
<ccie_99@yahoo.com>; <ccielab@groupstudy.com>
Sent: Saturday, November 04, 2000 10:40 AM
Subject: Re: PPP (dialer-group command)
>
> I thought on the called side, you will still put a dialer map in but leave
> the dialer string off. How do they want it on the lab?
>
> ----Original Message Follows----
> From: "Tony Olzak" <aolzak@buckeye-express.com>
> Reply-To: "Tony Olzak" <aolzak@buckeye-express.com>
> To: "Steve McNutt" <lpd@jacksonville.net>, "z z" <ccie_99@yahoo.com>,
> <ccielab@groupstudy.com>
> Subject: Re: PPP (dialer-group command)
> Date: Sat, 4 Nov 2000 01:09:15 -0500
>
> Right. All you'll want to do on the called side is use dialer-group and
set
> all traffic as interesting. This way it won't end calls. The calling side
> will end the call and the called side won't be able to initiate a call
> because it has no dialer map or string (leave these off).
>
> Tony
>
> ----- Original Message -----
> From: "Steve McNutt" <lpd@jacksonville.net>
> To: "z z" <ccie_99@yahoo.com>; <ccielab@groupstudy.com>
> Sent: Saturday, November 04, 2000 12:28 AM
> Subject: RE: PPP (dialer-group command)
>
>
> > becuase r2 has no interesting traffic defined he will always hang up
when
> > his idle timer expires, regardless of wether desireable traffic is
> flowing
> > across the link. proabably not a good thing.
> >
> > There seems to be one exception to this, and that is dialer watch.
> somehow
> > it is able to tell the remote router to reset it's idle timer if the
> watched
> > route has not come back up. wonder what protocol they use to do that.
> CDP
> > maybe? I didnt play with it enough to really figure it out. maybe I
was
> > smokin crack and actually had a dialer group on the other end.
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
z
> > z
> > Sent: Friday, November 03, 2000 11:05 PM
> > To: ccielab@groupstudy.com
> > Subject: PPP (dialer-group command)
> >
> >
> > Hi
> > Got one question about PPP.
> >
> > If we configure that only R1 can dial R2, do we need
> > to configure dialer-group/dialer-list on R2?
> >
> > If we configure so, R2 can disconnect the call.
> > However, is it necessary? It should be R1 to control
> > the connection. Am I right?
> >
> > thanks
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:41 GMT-3