From: McNutt, Steve (Steve.McNutt@xxxxxxxxxxx)
Date: Fri Nov 03 2000 - 18:28:00 GMT-3
Actually, I thought caslow's explaination wasn't half bad. there's also RFC
1795. http://www.rfc-editor.org/rfc/rfc1795.txt
As for myself I found going though chapters 2,3,4,7,8,9 and 10 of the IOS
12.0 bridging and IBM solutions guide to be very effective. The first part
of the Bridging and IBM config guide is much better than most of the config
guides, and just running through the chapters is quite educational. By
doing TB, then SRB then SR/TLB, then RSRB and then DLSW in order I felt I
gained alot of good insights. Chapter 3 (configuring source route bridging
in the IOS config guide) was for me the key that unlocked everything else.
Of course I haven't even had my first lab attempt yet, so take my views with
the appropriate grain of salt.
-----Original Message-----
From: Ronnie Royston [mailto:RonnieR@globaldatasys.com]
Sent: Friday, November 03, 2000 3:51 PM
To: ccielab@groupstudy.com
Subject: DLSW
It's time for me to dive into this subject. Anybody have a very good link
to an e-seminar / slideshow / whatever that describes dlsw in a very
understandable manner? Please advise.
Thanks a million.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:41 GMT-3