From: Ronnie Royston (RonnieR@xxxxxxxxxxxxxxxxx)
Date: Fri Nov 03 2000 - 14:53:26 GMT-3
That did it. Thanks.
-----Original Message-----
From: Arthur Davis [mailto:senzaart@usa.net]
Sent: Friday, November 03, 2000 9:43 AM
To: ccielab@groupstudy.com
Subject: Re: [IPX - multiple frame encapsulations on one wire]
Try a secondary network, i.e.
ipx netw 700 encap arpa sec
Ronnie Royston <RonnieR@globaldatasys.com> wrote:
I am trying to configure multiple IPX frame types on one e-net segment. It
works fine with subinterfaces but I can only specify one network if I simply
configure multiple net #s / encaps types under the main int. only. In the
latter case, the router takes the commands but only records the last
net#/frame type in the running config ??? According to CCO, this is
supposed to work without using subinterfaces. Any ideas? Thanks....
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:41 GMT-3