From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Wed Nov 01 2000 - 16:51:02 GMT-3
By default, only EBGP routes are redistributed. Use bgp
redistribute-internal under router config mode.......
Regards,
Justin Menga MCSE+I CCNP CCSE ASE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
-----Original Message-----
From: John Conzone [mailto:jkconzone@home.com]
Sent: Thursday, 2 November 2000 4:46 a.m.
To: ccielab
Subject: BGP to OSPF redist
I have 2 routers in BGP AS 2, R1 and R6. R1 has an EBGP connection
to R7 and an IBGP connection to R6. R6 has an EBGP connection to R8
(different AS than R7), and a IBGP connection to R1.
Both R1 and R6 have a EBGP route learned from their external
neighbor, and an IBGP route learned from the IBGP neighbor.
Both routes are in the main routing table in both routers.
Problem is that when I redistribute BGP into OSPF on either R6 or
R1, the only route that gets redistributed is that particular router's
EBGP learned route. The IBGP learned route does not get redistributed.
What am I missing?
I can get both routes into OSPF by doing redistribution on each
router, but I don't undertsand what is happening.
Thanks!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:39 GMT-3