From: Steve Clubb (sclubb@xxxxxxxxxxx)
Date: Mon Oct 30 2000 - 19:14:52 GMT-3
Here's a sample that I've done:
ip host SW2 2040 1.1.1.1
ip host SW1 2036 1.1.1.1
ip host R2 2037 1.1.1.1
ip host gold 2041 1.1.1.1
ip host R1 2033 1.1.1.1
ip host vpn 2051 1.1.1.1
ip host platinum 2048 1.1.1.1
ip host titanium 2049 1.1.1.1
ip host PIX2 2038 1.1.1.1
ip host PIX1 2034 1.1.1.1
ip host ld1 2035 1.1.1.1
ip host LD2 2039 1.1.1.1
ip host brass 2050 1.1.1.1
ip host copper 2043 1.1.1.1
ip host silver 2045 1.1.1.1
ip host iron 2046 1.1.1.1
ip host steel 2042 1.1.1.1
ip host bronze 2044 1.1.1.1
ip host aluminum 2047 1.1.1.1
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
no ip directed-broadcast
!
line 33 64
no exec
transport input all
-----Original Message-----
From: Bandele Hinton [mailto:bandeleh@hotmail.com]
Sent: Monday, October 30, 2000 1:07 PM
To: cisco@groupstudy.com; ccielab@groupstudy.com
Subject: 3640 terminal connections
I am currently working on establishing a terminal server configuration for
my 3640 router. my 3640 is configured with the following:
Slot 0: Async32A
Slot 1: Async32A
Slot 2: Ethernet0
With this configuration, I am looking to configure my system to allow a
telnet connection to be established to each on of my devices connected to my
async ports. I have a octopus cable that goes to several compaq servers.
These servers should be able to be accessed through a serial cable connected
to each.
Can anyone provide some insight into addressing this issue? Thanks a bunch
in advance!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:32 GMT-3