From: Jobson, Ed (ejobson@xxxxxxxxxxxxx)
Date: Mon Oct 30 2000 - 22:00:46 GMT-3
I have 3 routers set up in a Frame Relay hub and spoke layout, all using
point-to-point subinterfaces and manual dlci's. I have full IP connectivity
between the 3 and they are in OSPF area 0 all with 10 second default
point-to-point OSPF hello intervals. So connectivity is fine but the two
spoke routers do not form OSPF adjacencies. Is that correct or would I loose
marks for that? If so is there a way of getting spokes adjacent by changing
the interface type to multipoint or something? But I must stick to
point-to-point subinterfaces with manual dlci's?
Thanks, configs below.
Eddie.
HUB
R2
interface Serial1.1 point-to-point
ip address 137.1.7.17 255.255.255.252
frame-relay interface-dlci 103
!
interface Serial1.2 point-to-point
ip address 137.1.7.21 255.255.255.252
frame-relay interface-dlci 105
SPOKE1
R3
interface Serial0/0.1 point-to-point
ip address 137.1.7.18 255.255.255.252
frame-relay interface-dlci 103
SPOKE2
R5
interface Serial1.1 point-to-point
ip address 137.1.7.22 255.255.255.252
frame-relay interface-dlci 105
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:32 GMT-3