ISDN driving me f*&&in mad

From: damien (damien@xxxxxxxxxxx)
Date: Mon Oct 30 2000 - 11:02:17 GMT-3


   
   I am trying to get ISDN Callback working and alas its driving me
   crazy...........its probably something really simple as usual....! I
   have checked CCO and any other stuff I have, and it appears to be
   configured correctly...it could be IOS related.............can someone
   please shed some light.........configs below
   
   Router 2 ( Callback Server)
   
   username R3 callback-dialstring 8358662 password 0 cisco
   
   isdn switch-type basic-ni
   
   interface BRI0
    ip address 10.1.4.2 255.255.255.0
    no ip directed-broadcast
    encapsulation ppp
    dialer callback-secure
    dialer enable-timeout 2
    dialer map ip 10.1.4.3 name R3 class dial1 broadcast 8358662
    dialer-group 1
    isdn switch-type basic-ni
    isdn spid1 0835866101 8358661
    isdn spid2 0835866301 8358663
    ppp callback accept
    ppp authentication chap
    hold-queue 75 in
   !
   ip classless
   !
   !
   map-class dialer dial1
    dialer callback-server username
   dialer-list 1 protocol ip permit
   
   
   Router 3 ( Callback Client )
   
   username R2 password 0 cisco
   
   isdn switch-type basic-ni
   
   interface BRI0
    ip address 10.1.4.3 255.255.255.0
    no ip directed-broadcast
    encapsulation ppp
    dialer map ip 10.1.4.2 name R2 broadcast 8358661
    dialer-group 1
    isdn switch-type basic-ni
    isdn spid1 0835866201 8358662
    isdn spid2 0835866401 8358664
    ppp callback request
    ppp authentication chap
   !
   ip classless
   !
   dialer-list 1 protocol ip permit
   
   
   Some debug from R3 after a ping (authen & dialer events on)..........
   
   r3#p 10.1.4.2
   
   Type escape sequence to abort.
   Sending 5, 100-byte ICMP Echos to 10.1.4.2, timeout is 2 seconds:
   
   03:59:01: BR0 DDR: Dialing cause ip (s=10.1.4.3, d=10.1.4.2)
   03:59:01: BR0 DDR: Attempting to dial 8358661
   03:59:01: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
   03:59:01: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to
   8358661
   03:59:01: BR0:1 PPP: Treating connection as a callout
   03:59:01: BR0:1 PPP: Phase is AUTHENTICATING, by both
   03:59:01: BR0:1 CHAP: O CHALLENGE id 19 len 23 from "r3"
   03:59:01: BR0:1 CHAP: I CHALLENGE id 19 len 23 from "r2"
   03:59:01: BR0:1 CHAP: O RESPONSE id 19 len 23 from "r3"
   03:59:01: BR0:1 CHAP: I SUCCESS id 19 len 4
   03:59:01: BR0:1 CHAP: I RESPONSE id 19 len 23 from "r2"
   03:59:01: BR0:1 CHAP: O SUCCESS id 19 len 4
   03:59:01: BR0:1 DDR: Authenticated host r2 with no matching dialer map
   03:59:01:. BR0:1 DDR: Callback negotiated - waiting for server
   disconnect
   03:59:02: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1,
   changed state
   to up
   03:59:03: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from
   8358661 r2, ca
   ll lasted 1 seconds
   03:59:03: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
   03:59:03: DDR: Callback client for r2 8358661 created
   
   03:59:03: BR0:1 DDR: disconnecting call
   03:59:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1,
   changed state
   to down....
   Success rate is 0 percent (0/5)
   r3#
   03:59:48: DDR: No callback received from r2 8358661
   03:59:48: DDR: Freeing callback to r2 8358661
   
   Thanks
   Damien.
   
   



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:32 GMT-3