From: Yong (macro.yan@xxxxxxxxx)
Date: Mon Oct 30 2000 - 06:13:35 GMT-3
i was tried traffic-shaping on frame-relay ,i have setup the pvc mincir to 1600
0(16k), but display the mincir is 24000(24k) when i "show frame pvc" why ?
anybody give me a explain
thanks
the config and show... is following
interface Serial0
ip address 138.3.134.1 255.255.255.240
encapsulation frame-relay
ip ospf network point-to-multipoint
frame-relay traffic-shaping
frame-relay map ip 138.3.134.3 101 broadcast
frame-relay map ip 138.3.134.4 101 broadcast
frame-relay interface-dlci 101
class fr
!
map-class frame-relay fr
frame-relay mincir in 16000
~~~~~~~~~~~~~~~~~~~~~~~~~~~
frame-relay mincir out 16000
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
frame-relay cir 48000
frame-relay bc 6000
frame-relay be 16000
R1#sh frame-relay pvc 101
PVC Statistics for interface Serial0 (Frame Relay DTE)
DLCI = 101, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0
input pkts 711 output pkts 875 in bytes 54102
out bytes 63389 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 579 out bcast bytes 42924
pvc create time 01:24:37, last time pvc status changed 01:21:58
cir 48000 bc 6000 be 16000 limit 2750 interval 125
mincir 24000 byte increment 750 BECN response yes
~~~~~~~~~~~~
pkts 36 bytes 2668 pkts delayed 0 bytes delayed 0
shaping inactive
Serial0 dlci 101 is first come first serve default queueing
Output queue 0/40, 0 drop
R1#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:31 GMT-3