From: radha rani (radhaccie@xxxxxxxxxxx)
Date: Sun Oct 29 2000 - 16:46:54 GMT-3
Thanks for the input, everyone. I will try these suggestions tommorrow
and let you all know if it worked. (no access to the lab today.
-Radha
>From: "Derek Buelna" <dameon@aracnet.com>
>To: "'radha rani'" <radhaccie@hotmail.com>, <ccielab@groupstudy.com>
>Subject: RE:
>Date: Sat, 28 Oct 2000 08:32:37 -0700
>
>You may need multiring ip.
>This makes it so the router will include a rif when sending a frame out the
>interface. I believe it is an interface command.
>
>-Derek
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>radha rani
>Sent: Friday, October 27, 2000 3:23 PM
>To: ccielab@groupstudy.com
>Subject:
>
>Hello,
> I have a very simple SRB configuration which is not working. I
>would be very grateful if someone could shed some light on this.
>
>My topology is :
>
>r1 --- ring100---r4---ring300---r3
>
>r1 and r3 are acting as hosts and have ip addresses 10.10.1.1/24 and
>10.10.1.3/24 resp. r4 is the source-route-bridge. I am unable to ping
>r1 and r3 from each other.
>
>Thanks for your help.
>
>R4's config is as follows:
>
>r4#sh run
>Building configuration...
>
>Current configuration:
>!
>version 11.2
>no service password-encrypt
>no service udp-small-server
>no service tcp-small-server
>!
>hostname r4
>!
>!
>!
>interface Serial0
>no ip address
>shutdown
>!
>interface Serial1
>no ip address
>shutdown
>!
>interface TokenRing0
>no ip address
>ring-speed 16
>source-bridge 100 1 300
>!
>interface TokenRing1
>no ip address
>ring-speed 16
>source-bridge 300 1 100
>!
>no ip classless
>!
>!
>line con 0
>line aux 0
>line vty 0 4
>login
>!
>end
>
>r4#
>
>-Radha
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:31 GMT-3