CGMP

From: Honeid Rupawala (honeid2000@xxxxxxxxx)
Date: Wed Oct 25 2000 - 14:06:12 GMT-3

• Next message: DOWNEY, BRAD (PB): "RE: ASET Training to two weeks"
• Previous message: Devinder Singh: "OSPF virtual-link authentication prob"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi Team,

I have 3 routers R1,R2 and R3 connected to a CAT5K
switch all on the same VLAN.

One of the routers R1 has joined a multicast group say
224.5.5.5. The ethernet interfaces of the routers are
running cgmp with the "ip cgmp " command. PIM sparse
mode is also enabled on all routers and the RP is
R1.

I have also enabled cgmp on the switch with "set cgmp
enable " command.

R2 and R3 can ping 224.5.5.5 and get the response from

R1.

However, when I give " show multicast group cgmp " on
the switch, it is empty. It should show me the vlan
ID,
port no. and the multicast mac-address. But its not
happening.

Am I missing something ? Pls. help.

Regards

Honeid Rupawala.

=====
Honeid Rupawala

• Next message: DOWNEY, BRAD (PB): "RE: ASET Training to two weeks"
• Previous message: Devinder Singh: "OSPF virtual-link authentication prob"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:30 GMT-3