From: Fred Ingham (fningham@xxxxxxxxxxxxxxxx)
Date: Thu Feb 24 2000 - 14:27:34 GMT-3
I think you will find that there are NO BPDU'S exchanged between the
spokes in a hub and spoke topology. The example
you cited was for a full mesh topology using physical interfaces.
Fred
Brandon Shaw wrote:
>
> John,
> Configure the multipoint interface as part of the bridge group then add
> a frame map statement:
>
> int s0
> encap frame
> bridge 1
> frame map bridge 100 broadcast
> frame map bridge 200 broadcast
>
> Here is a link to the info on cisco's web site:
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/ibm_c/
bcprt1/bctb.htm#xtocid864616
>
> John Conzone wrote:
>
> > Anyone think of a way to bridge bewteen FR spokes with hub using
> > single multipoint interface? Can bridge from spokes to hub fine,
> > but can't think of a way to get the spokes to bridge across the hub.
> > Tunnel won't accept bridge. May not be a way, but just checking.
> > Thanks!
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:29 GMT-3