From: Forest Riek (forestr@xxxxxxx)
Date: Tue Oct 24 2000 - 01:27:11 GMT-3
Try this link: http://www.cisco.com/warp/customer/76/9.html
The trick is to pre configure the modem before you connect it to your router.
Hope this helps.
Forest
"Jobson, Ed" wrote:
> I am attempting to get a Courier ISDN modem to talk to a 2600 aux port
> (unsuccessfully).
>
> Has anyone any experience with this or a standard analogue courier modem on
> remote dial up. The modem seems to be answering the incoming analogue call
> okay but won't talk to the aux or com ports after loading the cisco
> recommended settings:
> line aux 0
> password 7 0458
> login
> modem autoconfigure type usr_courier
>
> Any pointers appreciated. I am in the UK, but don't think that should make
> too much difference from the U.S. settings?
>
> Thanks in advance.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:29 GMT-3