From: pbosio@xxxxxxxxxxxxxx
Date: Mon Oct 23 2000 - 21:05:48 GMT-3
John,
>From memory, IS-IS cannot work over a NBMA, must be configured as point-to-poi
nt
Page 678 of TCP/IP ( Jeff Doyle )
Cheers
Paul
"John Conzone" <jkconzone@home.com> on 24/10/2000 09:05:17 AM
Please respond to "John Conzone" <jkconzone@home.com>
To: "ccielab" <ccielab@groupstudy.com>
cc:
Subject: ISIS over frame partial mesh
Fax to:
Hub sees all spoke routes, one spoke sees other spoke router routes, other
spoke sees only hub routes, but not route from other spoke. Hub is DR (using
ISIS priority), all physical multipoint.
Databases' are the same. When I debug the ISIS process and SPFon the spoke
who doesn't see the other spokes route, I see the routes being accepted in the
SPF debug, but then they don't appear in the routing table.
Any ideas?
Thanks!
======================================================================
This email message has been swept by MIMEsweeper.
Hub sees all spoke routes, one spoke sees other spoke router
routes, other spoke sees only hub routes, but not route from other
spoke. Hub is DR (using ISIS priority), all physical multipoint.
Databases' are the same. When I debug the ISIS process and SPFon
the spoke who doesn't see the other spokes route, I see the
routes being accepted in the SPF debug, but then they don't appear in
the routing table.
Any ideas?
Thanks!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:29 GMT-3