From: Jack Heney (jheneyccie@xxxxxxxxxxx)
Date: Mon Oct 23 2000 - 16:41:29 GMT-3
Assuming you included a redistribute ospf command in your BGP config, did
you also include a metric for the redistributed routes? Just like RIP and
EIGRP, routes redistributed into BGP must have a metric assigned before they
will be advertised.
hth,
Jack
>From: "Horton, Jeff" <jhorton@lsfi.com>
>Reply-To: "Horton, Jeff" <jhorton@lsfi.com>
>To: "CCIE Groupstudy (E-mail)" <ccielab@groupstudy.com>
>Subject: BGP Redistribution
>Date: Mon, 23 Oct 2000 10:30:05 -0400
>
>Hello folks. Hopefully this isn't a stupid question. I was trying to
>redistribute my BGP routes into OSPF but I was never able to get them to
>redistribute for some reason from R6 to R3. Specifically the 200.200.200.0
>route.
>
>Any ideas?
>
>Thanks,
>
>Jeff
>
>R6#wr t
>Building configuration...
>
>Current configuration:
>!
>version 12.0
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname R6
>!
>!
>ip subnet-zero
>no ip domain-lookup
>!
>!
>!
>interface FastEthernet0/0
> ip address 11.1.1.6 255.255.0.0
> ip directed-broadcast
> ip ospf authentication-key cisco
> ip ospf cost 1
> ip ospf interface-retry 0
> ip ospf priority 100
>!
>interface Serial1/0
> ip address 10.10.1.6 255.255.0.0
> no ip directed-broadcast
> encapsulation frame-relay
> ip ospf network point-to-multipoint
> ip ospf interface-retry 0
> ip ospf priority 0
> no ip mroute-cache
> frame-relay map ip 10.10.1.1 932 broadcast
> frame-relay lmi-type cisco
>!
>interface Serial1/1
> no ip address
> no ip directed-broadcast
> shutdown
>!
>interface Serial1/2
> no ip address
> no ip directed-broadcast
> shutdown
> clockrate 2015232
>!
>interface Serial1/3
> no ip address
> no ip directed-broadcast
> shutdown
>!
>router ospf 1
> redistribute connected
> redistribute bgp 3 metric 1 subnets
> network 10.10.0.0 0.0.255.255 area 0
> network 11.1.0.0 0.0.255.255 area 4
>!
>router bgp 3
> no synchronization
> network 11.1.1.0 mask 255.255.0.0
> neighbor 10.10.1.1 remote-as 3
>!
>ip classless
>!
>!
>!
>line con 0
> transport input none
>line aux 0
>line vty 0 4
> login
>!
>end
>
>R6#
>R6#
>R6#
>TS#3
>[Resuming connection 3 to r3 ... ]
>
>R3#sh ip rou
>Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
>default
> U - per-user static route, o - ODR, P - periodic downloaded static
>route
> T - traffic engineered route
>
>Gateway of last resort is 11.1.1.6 to network 0.0.0.0
>
> 1.0.0.0/32 is subnetted, 1 subnets
>O IA 1.1.1.1 [110/50] via 11.1.1.6, Ethernet0/0
> 2.0.0.0/32 is subnetted, 1 subnets
>O IA 2.2.2.2 [110/114] via 11.1.1.6, Ethernet0/0
> 20.0.0.0/32 is subnetted, 1 subnets
>O IA 20.1.1.1 [110/114] via 11.1.1.6, Ethernet0/0
> 10.0.0.0/8 is variably subnetted, 10 subnets, 3 masks
>O IA 10.10.1.1/32 [110/49] via 11.1.1.6, Ethernet0/0
>O IA 10.10.1.5/32 [110/113] via 11.1.1.6, Ethernet0/0
>O IA 10.10.1.6/32 [110/1] via 11.1.1.6, Ethernet0/0
>O IA 10.3.0.0/16 [110/123] via 11.1.1.6, Ethernet0/0
>D EX 10.1.2.0/24 [170/2195456] via 11.2.1.7, Serial0/0
>D EX 10.1.1.0/24 [170/2195456] via 11.2.1.7, Serial0/0
>O IA 10.20.0.0/16 [110/113] via 11.1.1.6, Ethernet0/0
>O IA 10.44.1.4/32 [110/178] via 11.1.1.6, Ethernet0/0
>O IA 10.45.0.0/16 [110/177] via 11.1.1.6, Ethernet0/0
>O IA 10.55.0.0/16 [110/114] via 11.1.1.6, Ethernet0/0
> 11.0.0.0/16 is subnetted, 2 subnets
>C 11.2.0.0 is directly connected, Serial0/0
>C 11.1.0.0 is directly connected, Ethernet0/0
>D EX 192.168.100.0/24 [170/2195456] via 11.2.1.7, Serial0/0
>O*E2 0.0.0.0/0 [110/20] via 11.1.1.6, Ethernet0/0
>R3#wr t
>Building configuration...
>
>Current configuration:
>!
>version 12.0
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname R3
>!
>!
>memory-size iomem 20
>ip subnet-zero
>no ip domain-lookup
>!
>!
>!
> !
> !
> !
> !
> interface Ethernet0/0
> bandwidth 100000
> ip address 11.1.1.3 255.255.0.0
> ip directed-broadcast
> ip ospf authentication-key cisco
> ip ospf priority 0
>!
>interface Serial0/0
> ip address 11.2.1.3 255.255.0.0
> no ip directed-broadcast
> no ip mroute-cache
> no fair-queue
> clockrate 125000
>!
>interface TokenRing0/0
> no ip address
> no ip directed-broadcast
> shutdown
> ring-speed 16
>!
>router eigrp 1
> redistribute ospf 1 metric 2000 100 255 1 1500
> network 11.0.0.0
> no auto-summary
>!
>router ospf 1
> redistribute eigrp 1 metric 20 metric-type 1 subnets
> network 11.1.0.0 0.0.255.255 area 4
>!
>ip classless
>no ip http server
>!
>!
>!
>line con 0
> transport input none
>line aux 0
>line vty 0 4
> login
>!
>no scheduler allocate
>end
>
>R3#
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:29 GMT-3