IGRP route metric recalculate question, Pls.

From: Jansen (jysh@xxxxxxxxxxxxxx)
Date: Mon Oct 23 2000 - 00:58:44 GMT-3

• Next message: Atif Awan: "Re: IGRP route metric recalculate question, Pls."
• Previous message: Roby Jaiswal: "LAB SWAP - ISP Dial in SJ"
• Next in thread: Atif Awan: "Re: IGRP route metric recalculate question, Pls."
• Maybe reply: Atif Awan: "Re: IGRP route metric recalculate question, Pls."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi,all
        I got this route table when igrp is configured.
r3#sh ip ro ig
I 1.0.0.0/8 [100/8976] via 192.169.1.1, 00:00:02, Serial0
I 2.0.0.0/8 [100/1600] via 135.1.23.2, 00:00:02, Ethernet0
I 5.0.0.0/8 [100/9076] via 192.169.1.1, 00:00:02, Serial0
I 192.168.1.0/24 [100/160350] via 192.169.1.1, 00:00:02, Serial0
I 172.16.0.0/16 [100/8576] via 192.169.1.1, 00:00:02, Serial0

when i change the bandwidth of s0 to 100k,the route table looked like this,

r3#sh ip ro ig
I 1.0.0.0/8 [100/9076] via 135.1.23.2, 00:00:05, Ethernet0
I 2.0.0.0/8 [100/1600] via 135.1.23.2, 00:00:05, Ethernet0
I 5.0.0.0/8 [100/9176] via 135.1.23.2, 00:00:05, Ethernet0
I 192.168.1.0/24 [100/160350] via 192.169.1.1, 00:00:08, Serial0
I 172.16.0.0/16 [100/8676] via 135.1.23.2, 00:00:05, Ethernet0

so from this table i found that only the route metric of 192.168.1.0/24 is not
recalculated, but why?

Any suggestion is prefered.

Best Regards

            Jansen
            00-10-23

• Next message: Atif Awan: "Re: IGRP route metric recalculate question, Pls."
• Previous message: Roby Jaiswal: "LAB SWAP - ISP Dial in SJ"
• Next in thread: Atif Awan: "Re: IGRP route metric recalculate question, Pls."
• Maybe reply: Atif Awan: "Re: IGRP route metric recalculate question, Pls."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:29 GMT-3