From: Jack Heney (jheneyccie@xxxxxxxxxxx)
Date: Thu Oct 19 2000 - 16:41:53 GMT-3
I'm not sure if I fully understand your question...If r3 and r4 are both
running IGRP, then any devices in the workgroup that are using R3 as a
default gateway would already be able to reach r4....If the problem is r4
needs a route back to workgroup, that's another matter entirely. Without
using a static route or default network, I don't know of any way to pass
default ospf information into igrp....Are you redistributing OSPF into IGRP
or is that not allowed in the configuration? Maybe if you posted the
configs, I could be a little more helpful.
jack
>From: "Boris Bertelsons" <info@bertelsons.de>
>Reply-To: "Boris Bertelsons" <info@bertelsons.de>
>To: <ccielab@groupstudy.com>
>Subject: Default route redistributed to IGRP
>Date: Thu, 19 Oct 2000 20:12:21 +0200
>
>I came along an preparatiopn question which I was not able to solve:
>
>Workgroup --> R3 <-- Ethernet --> R4
>
>Workgroup is running OSPF
>R3 is running OSPF and IGRP
>R4 is running IGRP
>
>R4 should be reachable from the whole workgroup. The goal is to publish a
>default
>route with configuration on R3 only to R4. It is NOT allowed to use a
>default-network, static route or an additional network.
>
>Any Ideas how this can work ???
>
>Kind regards,
>Boris
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:28 GMT-3