From: aiqun hu (huaq@xxxxxxxxxxx)
Date: Thu Oct 19 2000 - 16:02:04 GMT-3
I am doing multicast lab and couldn't get ping going through. I set up the
following scenario:
to0 R5 s0------------s0 R1 e0---
on R5:
ip multicast-routing
int to0
ip icmp join-group 225.2.2.2
ip pim sparse-mode
exit
int s0
ip address X.X.X.X
ip pim sparse-mode
exit
ip pim rp-address R5s0 address
ip pim send-rp-announce TokenRing0 scope 255
on R1:
ip multicast-routing
int s0
ip address X.X.X.X
ip pim sparse-mode
clock rate 2000000
exit
int e0
ip address X.X.X.X
ip pim sparse-mode
exit
ip pim rp-address R5s0 address
When I try to ping 225.2.2.2 on R5 and R1, I couldn't get reply. Did I miss
sth or should I have some sort of multicast source to make Ping working?
Anybody has working cfg for multicast sparse mode with RP configured???
Thanks for your reply.
Rena
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:28 GMT-3