RE: the isdn config

From: Philip Neeson (pneeson@xxxxxxxxxxxxx)
Date: Thu Oct 19 2000 - 08:08:16 GMT-3

• Next message: tom cheung: "bgp routing update"
• Previous message: John Conzone: "Re: Multiple access lists for interface"
• Maybe in reply to: zhan wang: "the isdn config"
• Next in thread: Maljure, Sanjay: "RE: the isdn config"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi Zhan,

I believe you can use the "ip address negotiated" command, it may be an IOS
version dependent command though.

Thanks,

Philip.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/d
ial_c/dcprt11/dcezip.htm#xtocid1956410

> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> zhan wang
> Sent: 19 October 2000 11:18
> To: ccielab@groupstudy.com
> Subject: the isdn config
>
>
> Hi,
>
> any one here know that how to config a isdn BRI port
> to get one ip address automatically when dial to ISP?
>
> config is as following
>
> interface BRI0/0
> ip nat outside
> encapsulation ppp
> dialer string 2631
> dialer-group 1
>
> thanks a lot!
> Zhan
>

• Next message: tom cheung: "bgp routing update"
• Previous message: John Conzone: "Re: Multiple access lists for interface"
• Maybe in reply to: zhan wang: "the isdn config"
• Next in thread: Maljure, Sanjay: "RE: the isdn config"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:28 GMT-3