From: deep per (pradeepk@xxxxxxxxxx)
Date: Sun Oct 15 2000 - 23:47:36 GMT-3
Hi Brett
ftp router is on the serial int then the router is to be configured to point
to that server ,if it is on lan media it should still its good to give ip
address of the tftp server and file name ,pl explain in detail
pradeep
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Brett
Sent: Monday, 16 October 2000 15:26
To: ccielab@groupstudy.com
Subject: Autoinstall over Frame
Hi,
Has anyone tried using autoinstall via frame? I am having trouble trying to
get the new router to access the TFTP server. The new router does get it's
IP and Frame info from the exsiting router. Here are the config's:
Exsiting router:
interface Serial0.100 multipoint
ip address 137.20.100.5 255.255.255.224
ip helper-address 137.20.65.65
frame-relay map ip 137.20.100.3 503 broadcast
New Router after autoinstall:
!
interface Serial0
ip address 137.20.100.3 255.255.255.224
encapsulation frame-relay
no ip mroute-cache
frame-relay lmi-type ansi
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:27 GMT-3