From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Sun Oct 15 2000 - 11:26:02 GMT-3
I think following may work.
distance 100 0.0.0.0 255.255.255.255 115
This will keep internal distance same and external to 115.
Other command is
distance eigrp 55 115
This will change distance on all eigrp routes to 55 and 115.
Sam
----- Original Message -----
From: "Arne Holick-Kuhlmann" <ccie-lab@arne.de>
To: "CCIELAB" <ccielab@groupstudy.com>
Sent: Sunday, October 15, 2000 7:19 AM
Subject: How to change distance of ext. EIGRP
> Hello,
>
> I am trying to change the distance of some external EIGRP routes in my
routing
> table.
> The default is 170 but I would like one route (a default for example) with
a
> better distance.
>
> The command
>
> router eigrp 1
> distance 50 0.0.0.0 255.255.255.255
>
> only changes the distance of internal EIGRP routes:
>
> Gateway of last resort is 192.168.2.149 to network 0.0.0.0
>
> 192.168.1.0/28 is subnetted, 2 subnets
> C 192.168.1.192 is directly connected, Ethernet0
> --> D 192.168.1.176 [50/1817600] via 192.168.2.149, 00:00:29,
Serial1
> 192.168.2.0/24 is variably subnetted, 2 subnets, 2 masks
> C 192.168.2.148/30 is directly connected, Serial1
> C 192.168.2.149/32 is directly connected, Serial1
> --> D*EX 0.0.0.0/0 [170/2048000] via 192.168.2.149, 00:00:29, Serial1
>
>
> I know the command 'distance eigrp X Y' can change the external distance,
but
> only on a global basis, I can't apply an access list that changes the
distance
> of the default route only.
>
>
> any ideas?
>
> Thanks,
>
> Arne
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:27 GMT-3