From: Granofsky, Aaron (AGranofsky@xxxxxxxxxxx)
Date: Fri Oct 13 2000 - 02:36:05 GMT-3
Title: RE: default route into NSSA
Derek,
You got it on the nose. I tried adding *no-summary* and this is what
I ended up with:
Gateway of last resort is 11.1.0.5 to network 0.0.0.0
D 172.17.0.0/16 [90/2297856] via 172.16.0.7, 00:06:41, Serial0
C 172.16.0.0/16 is directly connected, Serial0
D 172.18.0.0/16 [90/2297856] via 172.16.0.7, 00:06:41, Serial0
11.0.0.0/16 is subnetted, 1 subnets
C 11.1.0.0 is directly connected, FastEthernet0
O*IA 0.0.0.0/0 [110/21] via 11.1.0.5, 00:01:38, FastEthernet0
O 172.16.0.0/12 is a summary, 00:06:33, Null0
BUT, My original question is still out there... R1 was generating a
default that r3 was picking up. R4 never got the default route
because it is in a NSSA. Is that by design? Is there something that
I can do to pass the default into the NSSA, or do I have to add *area
9 nssa default-information-originate*
Regards,
Aaron
-----Original Message-----
From: Derek Buelna [mailto:dameon@aracnet.com]
Sent: Thursday, October 12, 2000 10:28 PM
To: 'Erick B.'; 'Granofsky, Aaron'; ccielab@groupstudy.com
Subject: RE: default route into NSSA
I believe that configuring that command on the abr would make the area
totally stubby which makes it so type 3's are also blocked. No IA
routes
other than a default out I think would be present inside the area.
I guess I don't think this would allow a default into the nssa area.
I believe that if the abr in injecting a default into the nssa area
would be
fine. I would think that if the backbone knows about the default you
generated on some router and then once the abr receives the traffic,
he
would forward it to his default.
Thoughts?
-Derek
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
Erick B.
Sent: Thursday, October 12, 2000 10:07 PM
To: Granofsky, Aaron; ccielab@groupstudy.com
Subject: Re: default route into NSSA
You need to add 'no-summary' to the area command you
have.
--- "Granofsky, Aaron" <AGranofsky@bns.nec.com> wrote:
> I have what's probably a stupid question, but I
> can't seem to find the
> answer.
>
> I have the following setup.
>
> r1 -----------r3---------------r4--------r5
> area0 area9 (nssa) eigrp
>
>
> Router 1 is generating a default route which all
> ospf routers are receiving
> except for r4.
>
> So, do I assume that a default route won't be
> carried into a NSSA.
>
> BTW, If I replace *area 9 nssa* with *area 9 nssa
> default-information-originate* than r4 receives a
> default pointing to r3.
> (But I don't think that's the issue)
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:26 GMT-3