From: Feliz, Edgar (Edgar.Feliz@xxxxxxxx)
Date: Thu Oct 12 2000 - 01:52:46 GMT-3
Here is the output from the "sh dialer"
EF
r5#sh dialer
BRI0 - dialer type = ISDN
Dial String Successes Failures Last called Last status
0 incoming call(s) have been screened.
0 incoming call(s) rejected for callback.
BRI0:1 - dialer type = ISDN
Idle timer (300 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Dial reason: ip (s=172.16.65.5, d=255.255.255.255)
Interface bound to profile Dialer0
Time until disconnect 292 secs
Current call connected 00:04:14
Connected to 8358662 (r6)
BRI0:2 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is idle
Dialer0 - dialer type = DIALER PROFILE
Idle timer (300 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Dial String Successes Failures Last called Last status
8358662 80 0 00:04:16 successful Default
8358664 1 0 07:14:18 successful Default
r5#
r6#sh dia
BRI0 - dialer type = ISDN
Dial String Successes Failures Last called Last status
0 incoming call(s) have been screened.
0 incoming call(s) rejected for callback.
BRI0:1 - dialer type = ISDN
Idle timer (300 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Interface bound to profile Dialer0
Time until disconnect 287 secs
Current call connected 07:16:16
Connected to 8358661 (ccie)
BRI0:2 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is idle
Dialer0 - dialer type = DIALER PROFILE
Idle timer (300 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Dial String Successes Failures Last called Last status
8358661 0 0 07:16:19 failed Default
8358663 1 0 07:15:49 successful Default
r6#
-----Original Message-----
From: Kevin Baumgartner [mailto:kbaumgar@cisco.com]
Sent: Thursday, October 12, 2000 12:46 AM
To: Edgar.Feliz@BTNA.com
Subject: Re: ISDN staying up!!!
Well I don't think that is why the line stays up. Do a show dialer
to see why dial happened on both routers.
Kevin
>
> Kevin,
>
> I can ping. Yes link is up, and stays up until my "idle time-out" expires
> then it come right back up. I have only gotten this since I went to a
dialer
> int. configuration.
>
> EF
>
> -----Original Message-----
> From: Kevin Baumgartner [mailto:kbaumgar@cisco.com]
> Sent: Thursday, October 12, 2000 12:23 AM
> To: Edgar.Feliz@BTNA.com
> Subject: Re: ISDN staying up!!!
>
>
> Sure your link is up? Can you ping between routers over ISDN?
>
> Seems to me pkt type 0xC021 is CHAP and I don't think it's working.
>
> Kevin
>
> >
> > How can I stop the following that I believe is keeping up my ISDN line
> > without restricting PPP, as I am using PPP as my encap type? I get the
> > following when I "deb PPP packet, authentication, and negotiation.
> >
> > Mar 1 11:36:56: BR0:1 LCP: O ECHOREQ [Open] id 3 len 12 magic
0x028A54B4
> > *Mar 1 11:36:56: BR0:1 LCP: echo_cnt 1, sent id 3, line up
> > *Mar 1 11:36:56: BR0:1 PPP: I pkt type 0xC021, datagramsize 16
> > *Mar 1 11:36:56: BR0:1 LCP: I ECHOREP [Open] id 3 len 12 magic
0x02AEF0A1
> > *Mar 1 11:36:56: BR0:1 LCP: Received id 3, sent id 3, line up
> > *Mar 1 11:37:04: BR0:1 PPP: I pkt type 0xC021, datagramsize 16
> > *Mar 1 11:37:04: BR0:1 LCP: I ECHOREQ [Open] id 3 len 12 magic
0x02AEF0A1
> > *Mar 1 11:37:04: BR0:1 LCP: O ECHOREP [Open] id 3 len 12 magic
0x028A54B4
> > *Mar 1 11:37:06: BR0:1 LCP: O ECHOREQ [Open] id 4 len 12 magic
0x028A54B4
> > *Mar 1 11:37:06: BR0:1 LCP: echo_cnt 1, sent id 4, line up
> > *Mar 1 11:37:06: BR0:1 PPP: I pkt type 0xC021, datagramsize 16
> > *Mar 1 11:37:06: BR0:1 LCP: I ECHOREP [Open] id 4 len 12 magic
0x02AEF0A1
> > *Mar 1 11:37:06: BR0:1 LCP: Received id 4, sent id 4, line up
> > *Mar 1 11:37:14: BR0:1 PPP: I pkt type 0xC021, datagramsize 16
> >
> >
> > Thanks,
> >
> > Edgar Feliz
> >
> > Brazil x 2 11/13-14
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:26 GMT-3