From: Feliz, Edgar (Edgar.Feliz@xxxxxxxx)
Date: Thu Oct 12 2000 - 01:38:06 GMT-3
Eddie,
here is the output of the debug dialer packet, and dialer events. When I do
a deb PPP then the mess from before comes up. I do not see IP bringing up
the interface at all. It has only happened to me with Dialer interfaces.
Dial on demand packets debugging is on
r6#
*Mar 1 12:02:11: %DIALER-6-BIND: Interface BRI0:1 bound to profile Dialer0
*Mar 1 12:02:11: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
*Mar 1 12:02:11: dialer Protocol up for BR0:1
*Mar 1 12:02:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1,
change
d state to up
*Mar 1 12:02:17: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to
8358661
ccie
Thanks
EF
P.S. I hate to ask, but has anybody seen a bug report on this for IOS
c2500-ds-l_113-11a.bin? I will check CCO
-----Original Message-----
From: Eddie Parra [mailto:eparra@cisco.com]
Sent: Thursday, October 12, 2000 12:19 AM
To: Feliz, Edgar; 'Ccielab
Subject: RE: ISDN staying up!!!
Do a debug dialer and to find out what interesting traffic is triggering the
line.
-Eddie
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Feliz, Edgar
Sent: Thursday, October 12, 2000 12:11 AM
To: 'Ccielab
Subject: ISDN staying up!!!
How can I stop the following that I believe is keeping up my ISDN line
without restricting PPP, as I am using PPP as my encap type? I get the
following when I "deb PPP packet, authentication, and negotiation.
Mar 1 11:36:56: BR0:1 LCP: O ECHOREQ [Open] id 3 len 12 magic 0x028A54B4
*Mar 1 11:36:56: BR0:1 LCP: echo_cnt 1, sent id 3, line up
*Mar 1 11:36:56: BR0:1 PPP: I pkt type 0xC021, datagramsize 16
*Mar 1 11:36:56: BR0:1 LCP: I ECHOREP [Open] id 3 len 12 magic 0x02AEF0A1
*Mar 1 11:36:56: BR0:1 LCP: Received id 3, sent id 3, line up
*Mar 1 11:37:04: BR0:1 PPP: I pkt type 0xC021, datagramsize 16
*Mar 1 11:37:04: BR0:1 LCP: I ECHOREQ [Open] id 3 len 12 magic 0x02AEF0A1
*Mar 1 11:37:04: BR0:1 LCP: O ECHOREP [Open] id 3 len 12 magic 0x028A54B4
*Mar 1 11:37:06: BR0:1 LCP: O ECHOREQ [Open] id 4 len 12 magic 0x028A54B4
*Mar 1 11:37:06: BR0:1 LCP: echo_cnt 1, sent id 4, line up
*Mar 1 11:37:06: BR0:1 PPP: I pkt type 0xC021, datagramsize 16
*Mar 1 11:37:06: BR0:1 LCP: I ECHOREP [Open] id 4 len 12 magic 0x02AEF0A1
*Mar 1 11:37:06: BR0:1 LCP: Received id 4, sent id 4, line up
*Mar 1 11:37:14: BR0:1 PPP: I pkt type 0xC021, datagramsize 16
Thanks,
Edgar Feliz
Brazil x 2 11/13-14
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:26 GMT-3