From: Pinnacle -- Erik Freeland (erik.freeland@xxxxxxxxxxxxxxx)
Date: Wed Oct 11 2000 - 17:46:20 GMT-3
Since I havent taken the lab, i have not signed an NDA. I have heard that
the serial cables are connected to patch cables as well. In the mind of a
CCIE that is a friend, this really confused him for a while on his first
try.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jack Heney
Sent: Wednesday, October 11, 2000 1:10 PM
To: ccielab@groupstudy.com
Subject: Lab cabling
The answer to this question may be in violation of the NDA, so I understand
if it can't be answered, but I was wondering about the cabling setup in the
lab...I understand that there is a patch panel, which I would assume can be
used for your ethernet/tokenring connections, but how are the serial
connections handled? Are there a bunch of cables just sitting in front of
you and you connect the routers directly via serial cables? This is the way
I would figure it works...I guess my real question is are you only
responsible for cabling the patch panel or are there other connections you
need to make? Once again, I'm not looking for somenone to violate the NDA,
but I figure the equipment list is posted and I though that cabling would
sort of fall into the same realm...Any answers would be greatly
appreciated...Jack
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:25 GMT-3