From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Sun Oct 08 2000 - 09:19:49 GMT-3
Correct, you would need someone on site to power cycle it for you. But
there's almost always someone at a site, even a secretary, etc, just talk
them through what the router looks like and where the power switch is
located.
Brian
On Sun, 8 Oct 2000, Wu,Jiang wrote:
> Using Windows telnet, you can use "Ctrl-Shift-6 b" to send a break. While, w
hat I realy mean is how you can restart a router when you cannot attach it or g
et into its priviledge mode?
>
> ----- Original Message -----
> From: Brian Hescock <bhescock@cisco.com>
> To: Wu,Jiang <wujiang@bj163.com>
> Cc: Andy Singh <asingh@slamdunknetworks.com>; <ccielab@groupstudy.com>
> Sent: Sunday, October 08, 2000 2:38 AM
> Subject: Re: How to break the password Thru dial-in
>
>
> > Actually, you can. Check the archives, there's been a couple of
> > discussions on this within the past few months. I know from personal
> > experience you can do it when using a unix box and dialing into a terminal
> > server. I believe the break sequence is <ctrl><shift>right
> > bracket, which is the ] key. You're then given a prompt and you type "send
> > break" and press enter. Voila, you've done it.
> >
> > Brian
> >
> > On Sat, 7 Oct 2000, Wu,Jiang wrote:
> >
> > > I think you can only reload in privilege mode or configured that command
to be used in user mode. So you cannot recover a lost password through dial-in.
> > > For the break key, check:
> > > http://www.cisco.com/warp/public/701/61.html
> > >
> > > ----- Original Message -----
> > > From: Andy Singh <asingh@slamdunknetworks.com>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Friday, October 06, 2000 2:48 AM
> > > Subject: How to break the password Thru dial-in
> > >
> > >
> > > > I know there a was similar thread a while back but this is lil differen
t
> > > >
> > > > I need to recover the password on 3662 via a terminal server. basically
the
> > > > setup is something like this
> > > >
> > > > PC (Hyper-term)-----dial-in
> > > > PSTN-------2611(term-server)---console-async(3662). so I dial in to the
> > > > terminal server..then console into the 3662 and reload...then I can't s
end a
> > > > break to it for it go into bootprom..is there any other dial in program
out
> > > > there that I can use. any help be appreciate.
> > > > thanks
> > > > Andy
> > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:24 GMT-3