From: John Koehl (jfkoehl@xxxxxxxxxxxxxxxxx)
Date: Fri Oct 06 2000 - 19:59:23 GMT-3
The prefix is assigned to Cisco when you use the default. You can
change it, but it is recommended that you change only the esi. You
can use the esi address, but if you have a hardware failure you will
have to change the configs, that is the benefit of assigning the esi.
I hope that helps.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Sanjay Bhakta
Sent: Wednesday, October 04, 2000 7:06 PM
To: CCIE Group Study (E-mail)
Subject: ATM NSAP Question
Within an ATM switch, it the ATM prefix same for each client on ATM
port and the ESI the only unique identification? or can you have the
entire NSAP address different on one port/client then other?
********
Sanjay Bhakta (RTP 10/18)
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:24 GMT-3