From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Fri Sep 29 2000 - 18:44:45 GMT-3
Well not seeing the topology of the network I am guess here.
But it could be something like this.
CAT ----------------------- R1
|
--------------------------- R2
Then configure two trunk ISL ports and configure ISL on R1 and R2.
Define trunk R1 with a lower priority (will be the priority trunk used)
than R2. So in this example clients that are connected on the CAT
will go to R1 first and if this trunk fails go to R2.
Just a guess ....
Kevin
At 01:59 PM 9/29/00 -0700, you wrote:
>Hi.
>
>Is anybody know what is mean - "configure Catalyst so that client choose r1
>as primary gateway and r2 as seconday gateway"......
>I think that r1 and r2 configured for IRDP (with priority..) but what is
>about Catalist...
>The only I can guess - that you should do "set ip redirect enable" on
>catalyst...
>
>Any others guess?
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:09 GMT-3