From: Eddie Parra (eparra@xxxxxxxxx)
Date: Fri Sep 29 2000 - 16:11:19 GMT-3
ip ospf network point-to-point
or
Summarize the /32 as something else on your ABR's...
-Eddie
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Connary, Julie Ann
Sent: Friday, September 29, 2000 2:59 PM
To: ccielab@groupstudy.com
Subject: loop back interfaces and ospf
Hi all,
does anyone know how to get OSPF to advertise a loopback as a subnet vs a
host route?
If I have Router 1 with a loop back interface, ip address 172.16.220.1, and
that loopback is in area 0.
Router 2, also in area 0, has a host route in it's ip routing tables vs. a
subnet route for 172.16.220.0
Here's the setup
172.16.220.1
loopback 0 --------R1 --------------Serial ---------R2
172.16.1.0
on router 1 and router 2:
router ospf 1
network 172.16.0.0 0.0.255.255 area 0
I thought about using area 0 range 172.16.220.0 255.255.255.0
but it did not make a difference.
Thanks,
Julie Ann
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:09 GMT-3