From: Tony Olzak (aolzak@xxxxxxxxxxxxxxxxxxx)
Date: Fri Sep 29 2000 - 10:34:02 GMT-3
Try making the ethernet interface passive. Then use the neighbor
command to establish an adjacency with R2. This should prevent R1 from
sending anything to R3.
Tony
----- Original Message -----
From: micklegao@netease.com
To: ccielab@groupstudy.com
Sent: Friday, September 29, 2000 8:52 AM
Subject: nonbrocast (ospf) ---help!!!!
hi,
in the ethernet, i only waant to r1 establish ospf adj with r2, not
with r3.
no auth , no filter.
how to do this?
i use nonbrocast and nei command, eveything is ok, r1 establish adj
with r2 with unicast, but when i add the r3, the troubles come.
i only use nei command in r1, and r1 establish adj with r2, as to
r3, no nei command at r1, and only add nei command at r3, it seems
that when r3 send a hello with unicast to r1 , r1 receive it, and it
auto send a hello , though i have not config it at r1 .
so r3 finally establish adj with r1.
i have debug all about this.
anybody , suggestion???
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:09 GMT-3