From: Bob Reed (bobr@xxxxxxxxxxx)
Date: Wed Sep 27 2000 - 22:05:49 GMT-3
You can believe what you want, but the LS1010 is not on the list of
equipment for the CCIE lab. This is not to say there are none in the lab,
just that you will not be responsible for it. There is no promise you will
have ATM or not. If you do have it in your lab, it could be CLIP, LANE, PVC
or anything else they can think up the the IOS will do.
See http://www.cisco.com/warp/customer/625/ccie/ATM_FAQs.html#2 for the
Cisco answer.
Good luck,
Bob Reed
CCIE #6119
----- Original Message -----
From: "Kristian Bjoernskov" <krbj-ccie@novo.dk>
To: "R. D. Zhang" <rdzhang@xtranetsolutions.com>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, September 26, 2000 3:04 PM
Subject: Re: how many ls1010s in the lab?
> On Tue, 26 Sep 2000, R. D. Zhang wrote:
>
> > Hey, All
> >
> > I plan to take the lab in Nov., but I don't know how many ls1010 within
> > the ccie lab. Could you tell me something about it? i.e. one or two.
>
> So far I have never heard anyone who should actually configure a ls1010.
> What you will have to configure is an ATM interface in a C3600 or simular
> to connect to a PVC, and do some QoS, routeing, static mappings and of
> cource - no subinterfaces! 8)
>
> Most kind regards,
> Kristian Bjoernskov, <mailto:krbj@novo.dk>
> Novo Nordisk IT, Network - internet.
> Phone: +45 4442 3299. Fax: +45 4442 6061
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:07 GMT-3