From: Jason1 (jason1@xxxxxxxxxx)
Date: Wed Sep 27 2000 - 15:05:04 GMT-3
I think one of the purpose is not so much as to connect them as to test DDR.
Jason
----- Original Message -----
From: "Elaine B. Lopes" <elopes@cisco.com>
To: "Christopher M. Heffner" <cheffner@attglobal.net>; "Ccielab@Groupstudy.
Com" <ccielab@groupstudy.com>
Sent: Wednesday, September 27, 2000 9:51 AM
Subject: RE: AUX to AUX
> Try using the cable that comes with any Cisco box (yeah, the black or
light blue console cable), plug on the AUXs on the 2 routers back-to-back
and use async interfaces to configure them. You don't need to dial, just
config PPP/HDLC and they will communicate.
> Cheers,
> Elaine
>
> At 08:40 AM 09/27/2000 -0400, Christopher M. Heffner wrote:
> >You can purchase a Teltone ISDN Simulator for around $1850.00 brand new.
> >The simulator will take care of ISDN and 56K analog simulation too.
> >
> >Let me know if you more details.
> >
> >Chris "The Bulldog" Heffner
> >Strategic Network Solutions, Inc.
> >IMCR Course Director
> >Certified Cisco Systems Instructor
> >CCSI, CCNA, CCDA, MCT, MCSE, MCNI, MCNE, CLI, CLP, CTT, ASE, A+
> >cheffner@attglobal.net
> >
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> >Steve McNutt
> >Sent: Tuesday, September 26, 2000 11:16 PM
> >To: ccielab@groupstudy.com
> >Subject: RE: AUX to AUX
> >
> >
> >Tony,
> >
> >I'm assuming your looking for a cost effective lab DDR setup. if not,
Just
> >delete and move on ;-)
> >
> >Do a search on ebay for teltone. you can pick up a used POTS simulator
for
> >dirt cheap (1 talk path under 100 bucks, @200 bucks for two talk paths).
> >
> >I looked at the cost of an ISDN simuator and the BRI modules (it was like
4
> >grand total!!) and decided that AUX ports with a POTS simuator and modems
> >would get the job done (hehe AUX ports and Sportsters, the poor man's
dial
> >backup).
> >
> >To brush up on my ISDN troubleshooting skills I figure I'll just rent
some
> >time on someone else'e rack, or leech some time on the rack at the local
> >Cisco sales office (sure, I'll check out whatever newly aquired product
line
> >your pimping this week, just gimme a few hours on the rack dude).
> >
> >-steve
> >
> > > > > > -----Original Message-----
> > > > > > From: Tony Olzak [mailto:aolzak@buckeye-express.com]
> > > > > > Sent: 26 September 2000 16:06
> > > > > > To: ccielab@groupstudy.com
> > > > > > Subject: AUX to AUX
> > > > > >
> > > > > >
> > > > > > Guys,
> > > > > >
> > > > > > Anyone have a sample config for an AUX to AUX setup?
> > > > > >
> > > > > >
> > > > > > Tony
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:04 GMT-3