From: Connary, Julie Ann (jconnary@xxxxxxxxx)
Date: Wed Sep 27 2000 - 11:47:33 GMT-3
Hi All,
I found the problem - it is a bug in the code which is fixed in the 12.0
code. I am running 11.3.
Thanks,
Julie Ann
At 07:36 AM 9/27/2000 -0700, you wrote:
>Julie,
>
>Do you have a
>
>dialer map snapshot
>
>command entered?
>
>Dan
>
>
>
>
>"Connary, Julie Ann" <jconnary@cisco.com> on 09/27/2000 06:56:30 AM
>
>Please respond to "Connary, Julie Ann" <jconnary@cisco.com>
>
>To: ccielab@groupstudy.com
>cc: (bcc: Dan Price/PFC/Providian)
>
>Subject: snapshot routing and multilink ppp
>
>
>
>Hi,
>
>does anyone know why (or maybe it is not allowed) snapshot routing does not
>work when
>the BRI interface is set for multilink ppp? when I configure multilink
>ppp, at the end of the quiet period the snapshot
>triggers the BRI to dial, both channels are connected (dialer
>load-threshold 1 is set) but no routing updates
>are exchanged. As soon as I remove ppp multilink from the configuration,
>snapshot works find and routing updates
>are appropriately exchanged during the active period. I have done a
>preliminary search, but have found no
>documentation outlining the restrictions, except that ppp CHAP
>authentication must be configured.
>
>Thanks,
>
>Julie Ann
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:04 GMT-3