From: Elaine B. Lopes (elopes@xxxxxxxxx)
Date: Wed Sep 27 2000 - 13:51:01 GMT-3
Try using the cable that comes with any Cisco box (yeah, the black or light blu
e console cable), plug on the AUXs on the 2 routers back-to-back and use async
interfaces to configure them. You don't need to dial, just config PPP/HDLC and
they will communicate.
Cheers,
Elaine
At 08:40 AM 09/27/2000 -0400, Christopher M. Heffner wrote:
>You can purchase a Teltone ISDN Simulator for around $1850.00 brand new.
>The simulator will take care of ISDN and 56K analog simulation too.
>
>Let me know if you more details.
>
>Chris "The Bulldog" Heffner
>Strategic Network Solutions, Inc.
>IMCR Course Director
>Certified Cisco Systems Instructor
>CCSI, CCNA, CCDA, MCT, MCSE, MCNI, MCNE, CLI, CLP, CTT, ASE, A+
>cheffner@attglobal.net
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Steve McNutt
>Sent: Tuesday, September 26, 2000 11:16 PM
>To: ccielab@groupstudy.com
>Subject: RE: AUX to AUX
>
>
>Tony,
>
>I'm assuming your looking for a cost effective lab DDR setup. if not, Just
>delete and move on ;-)
>
>Do a search on ebay for teltone. you can pick up a used POTS simulator for
>dirt cheap (1 talk path under 100 bucks, @200 bucks for two talk paths).
>
>I looked at the cost of an ISDN simuator and the BRI modules (it was like 4
>grand total!!) and decided that AUX ports with a POTS simuator and modems
>would get the job done (hehe AUX ports and Sportsters, the poor man's dial
>backup).
>
>To brush up on my ISDN troubleshooting skills I figure I'll just rent some
>time on someone else'e rack, or leech some time on the rack at the local
>Cisco sales office (sure, I'll check out whatever newly aquired product line
>your pimping this week, just gimme a few hours on the rack dude).
>
>-steve
>
> > > > > -----Original Message-----
> > > > > From: Tony Olzak [mailto:aolzak@buckeye-express.com]
> > > > > Sent: 26 September 2000 16:06
> > > > > To: ccielab@groupstudy.com
> > > > > Subject: AUX to AUX
> > > > >
> > > > >
> > > > > Guys,
> > > > >
> > > > > Anyone have a sample config for an AUX to AUX setup?
> > > > >
> > > > >
> > > > > Tony
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:03 GMT-3