From: cdmurray@xxxxxxxxxxxxxxx
Date: Mon Sep 25 2000 - 19:11:35 GMT-3
Tony,
In addition to Mark's response on map stmts etc.. you cannot ping the local
interface on
a frame-relay network unless you have the loopback dlci setup and this is
usually only used for
diagnostic purposes.
Chrissy
<Graphic image not retained>
aolzak@buckeye-express.com on 26/09/2000 04:49:51 AM
To: ccielab@groupstudy.com @ internet
cc: aolzak@buckeye-express.com @ internet
Subject: Frame-relay multipoint
Guys,
Without running a routing protocol like OSPF, how do you get two routers to
ping each other over the frame cloud when they do not have a direct PVC to
each other. For example, R1 has a pvc to R2 and one to R3. They are all on
the same network but R2 has to go through R1 to ping R3. How can you
accomplish this before a routing protocol is used? I'm guessing using
policy-basd routing with a route map that sets the next hop?
Also, how can you enable a router to ping itself on a frame connection?
Thanks,
Tony
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:02 GMT-3