From: yujianchun (stiff.yu@xxxxxxxxxxxxxxxxxx)
Date: Fri Sep 22 2000 - 01:52:11 GMT-3
pls add command map list in for ip to PVC in 4500.then try.
-----Original Message-----
From: greg <greg@cblconsult.com>
To: ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: 21 September 2000 12:27
Subject: help cat atm blade to ls1010 to 4500
help please
I want to ping to sc0 on cat from 4500 my configs are below for all
devices
/////////// //////////////
//////////
4500 -------------- ls1010 ------------ cat5k
////////// //////////////
//////////////
4500 config
interface ATM0
ip address 172.16.10.8 255.255.255.0
no ip directed-broadcast
pvc 0/16 ilmi
!
pvc 0/5 qsaal
!
no atm ilmi-keepalive
!
interface ATM0.10 point-to-point
no ip directed-broadcast
pvc 4/44
broadcast
encapsulation aal5snap
!
ls1010 config
!
hostname Switch
!
!
!
atm service-category-limit cbr 64512
atm service-category-limit vbr-rt 64512
atm service-category-limit vbr-nrt 64512
atm service-category-limit abr-ubr 64512
atm address 47.0091.8100.0000.00d0.baf3.3b01.00d0.baf3.3b01.00
atm router pnni
node 1 level 56 lowest
redistribute atm-static
!
!
interface ATM0/0/0 ****************4500 goes here
no keepalive
!
interface ATM0/0/1 ************atm module on cat goes here
no keepalive
atm pvc 3 33 interface ATM0/0/0 4 44
!
interface ATM0/0/2
no keepalive
ATM CONFIG
version 11.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname ATM
!
!
!
!
interface Ethernet0
!
interface ATM0
atm pvc 1 3 33 aal5snap
atm pvc 3 0 16 ilmi
atm pvc 2 0 5 qsaal
atm bind pvc vlan 1 10
!
alias exec t conf t
!
line con 0
line vty 0 4
no login
!
end
I put sc0 in vlan 10 172.16.10.1 and can't ping it from 4500
the packets are leaving the 4700 but i have no idea what happens
after that
I have a test in san jose on fri and sat any one else
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:00 GMT-3