Re: Sho IP Route output display

From: David FAHED (dfahed@xxxxxxxxxxxx)
Date: Thu Sep 21 2000 - 19:12:16 GMT-3

• Next message: Kevin Baumgartner: "Re: ISDN Problem and OSPF Demand circuit"
• Previous message: Truman, Michelle, NTCOM: "RE: Sho IP Route output display"
• Maybe in reply to: Truman, Michelle, NTCOM: "Sho IP Route output display"
• Next in thread: CKORENT@xxxxxxxxxxxxx: "RE: Sho IP Route output display"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
You can use:
  ip netmask-format ?
  bit-count Display netmask as number of significant bits
  decimal Display netmask in dotted decimal
  hexadecimal Display netmask in hexadecimal
You have to put this command on the apropriate config-line:
If you are conected by:
Telnet-> line vty 0 4
or
console-> line console 0

"Truman, Michelle, NTCOM" wrote:

> Does anyone know if it is possible to change the output display of "sho ip
> route" or "sh ip bgp" to display routes with the full net mask listing
> (255.255.x.x e.g.) instead of the /xx prefix length?
>

• Next message: Kevin Baumgartner: "Re: ISDN Problem and OSPF Demand circuit"
• Previous message: Truman, Michelle, NTCOM: "RE: Sho IP Route output display"
• Maybe in reply to: Truman, Michelle, NTCOM: "Sho IP Route output display"
• Next in thread: CKORENT@xxxxxxxxxxxxx: "RE: Sho IP Route output display"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:00 GMT-3