From: Elaine B. Lopes (elopes@xxxxxxxxx)
Date: Thu Sep 21 2000 - 19:31:19 GMT-3
Hey Bill,
I have no experience with AGS, but if it's similar with other IOS boxes, check
the config-register if it's 0x2102. If it's set to ignore NVRAM when it boots (
bit 6=1), that's the behavior. You can easily identify it by doing a sh startup
-config (or similar, of course) - all your configs should be there.
Elaine
At 09:16 AM 09/21/2000 -0700, Bill Dellamar wrote:
>I have an ags+ that loses the config everytime I
>remove power from it. The write mem says it works,
>but then I remove power from the box and then reapply
>it, the config is lost. I've searched the docs and
>cant' find like a battery backup or anything. Is the
>EEPROM bad or is there a battery backup for the NVRAM?
>
>Thanks,
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:00 GMT-3