From: Andrew (arousch@xxxxxxxx)
Date: Wed Sep 20 2000 - 13:45:38 GMT-3
There is only one CD. It's the Universal CD.
At 12:32 PM 9/20/00 -0400, Moran, Ed wrote:
>This is a step of the conversation, but which CD are you refering to. I
>understand that Cisco provides the CD on the exam. Is that the standard
>documentation CD or the UniverCD that I've seen around? Or are these the
>same?
>
>-----Original Message-----
>From: Santarsiero, Bill [mailto:BSantarsiero@greenwichtech.com]
>Sent: Wednesday, September 20, 2000 12:06 PM
>To: 'Rupawala, Honeid '; ''ccielab@groupstudy.com' '
>Subject: RE: CAT5K password recovery.
>
>
>I got burned on this on my first attempt, and since then I used the Cisco
>CD, which has a decent step by step procedure. Use that as your source, so
>you can reference it on the exam.
>
>Bill
>
>-----Original Message-----
>From: Rupawala, Honeid
>To: 'ccielab@groupstudy.com'
>Sent: 9/20/00 11:21 AM
>Subject: CAT5K password recovery.
>
>Hi team,
>
>Can anyone tell me how is the password recovery on the Catalyst 5000
>successfully done. It is said that the password is not effective till
>the
>first 30 sec.
>When does this 30 sec. period start ? Immediately after I get the boot
>messages on the console OR after the bootstrap loads OR after I get the
>Console >
>prompt ?
>
>I tried all 3 ways above, but no luck. Pls. help.
>
>Regards
>
>Honeid Rupawala.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:59 GMT-3