From: Rasheim Myers (ramyers@xxxxxxxxx)
Date: Wed Sep 20 2000 - 13:18:07 GMT-3
I think the best way is to clear the passwords first. Meaning, don't try to
change the password in the 30 second interval, just clear it so that the
password is blank. Then, change it at your leisure.
I hope this is what you were looking for. If not, please disregard.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Santarsiero, Bill
Sent: Wednesday, September 20, 2000 12:06 PM
To: 'Rupawala, Honeid '; ''ccielab@groupstudy.com' '
Subject: RE: CAT5K password recovery.
I got burned on this on my first attempt, and since then I used the Cisco
CD, which has a decent step by step procedure. Use that as your source, so
you can reference it on the exam.
Bill
-----Original Message-----
From: Rupawala, Honeid
To: 'ccielab@groupstudy.com'
Sent: 9/20/00 11:21 AM
Subject: CAT5K password recovery.
Hi team,
Can anyone tell me how is the password recovery on the Catalyst 5000
successfully done. It is said that the password is not effective till
the
first 30 sec.
When does this 30 sec. period start ? Immediately after I get the boot
messages on the console OR after the bootstrap loads OR after I get the
Console >
prompt ?
I tried all 3 ways above, but no luck. Pls. help.
Regards
Honeid Rupawala.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:59 GMT-3