From: mark salmon (masalmon@xxxxxxxxx)
Date: Tue Sep 19 2000 - 18:50:04 GMT-3
Hi all. I checked the archives before I ask here. Has anyone been able
to break into a router that they reverse telet to? I can break into
the access server fine on a WIn NT 4.0 using terminal, but cannot break
into the reverse telnet router.
Tip for lab testers.
If you have a high end router like the 36xx connected to a 3926 tr
switch, be careful. Even though the tr interface indicates up/up.
Compare the duplex settings on the router port and the switch port. I
encountered a duplex mis match that preventing me from pinging across
the tr ring to another router. This is despite the up/up state on the
port. THe router was half duplex, the switch port was auto-full. I
hard coded it to half duplex and was able to ping away. In addition,
the routr interface would not come up until I configured the port for
early token relase (16 meg only). At least under 11.1 it is not on be
default.
--Mark Salmon Cisco Systems Inc 8735 W. Higgins Road Suite 300 Chicago IL 60631 Phone:773-695-8235 Pager:800-365-4578 email: masalmon@cisco.com Empowering The Internet Generation.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:58 GMT-3