Re: dlsw ?

From: zheng jiang gu (zjgu@xxxxxxxxxx)
Date: Mon Sep 18 2000 - 00:25:20 GMT-3

• Next message: Simon Baxter: "RE: mobile IP/ARP"
• Previous message: Aaron DuShey: "RE: mobile IP/ARP"
• Maybe in reply to: zheng jiang gu: "dlsw ?"
• Next in thread: zheng jiang gu: "Re: dlsw ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
   After add the dmac 700
   access-list 700 per 0008.2557.359c
   access-list 700 per c000.0000.0080
   It works well.
   But I do not know the mac belongs what?
   
   
   
   thanks kong ,I will try non-can right
   
   ----- Original Message -----
   
   From: kongck
   
   To: zheng jiang gu ; ccielab@groupstudy.com
   
   Sent: Monday, September 18, 2000 8:06 AM
   
   Subject: Re: dlsw ?
   
   change the MAC address to non-cannonical format,and take a try.
   
   kck
   
   From: zheng jiang gu
   
   To: ccielab@groupstudy.com
   
   Sent: Sunday, September 17, 2000 11:06 PM
   
   Subject: dlsw ?
   
   ------vlan12-----e0 R1 s0 ---------s0/0 R2 t0/0-------ring2
   
   when I use "dlsw remote-peer 0 tcp 172.16.217.1 dest-mac
   0008.2557.359c" on the r2.
   
   Only the pc with mac-address 0008.2557.359c can see the netbios host
   on the ring2.
   
   But the pc one the ring2 can not see the 0008.2557.359c PC.
   
   
   
   But when I config the dlsw remote-peer 0 tcp 172.16.217.1 dmac 700
   
   access 700 per 0.0.0 ffff.ffff.ffff.It works !!!
   
   So whose mac address I should add to the peer?
   
   
   
   
   
   thanks in advance
   
   
   
   

• Next message: Simon Baxter: "RE: mobile IP/ARP"
• Previous message: Aaron DuShey: "RE: mobile IP/ARP"
• Maybe in reply to: zheng jiang gu: "dlsw ?"
• Next in thread: zheng jiang gu: "Re: dlsw ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:57 GMT-3