dlsw backup peers

From: Aaron DuShey (aaron.dushey@xxxxxxxxxxxxxxxxxxxxx)
Date: Sat Sep 16 2000 - 19:39:48 GMT-3

• Next message: Brett: "Re: bridging vlan on ISL trunk"
• Previous message: John Conzone: "bridging vlan on ISL trunk"
• Next in thread: John Conzone: "Re: dlsw backup peers"
• Maybe reply: John Conzone: "Re: dlsw backup peers"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
When using DLSW backup peers, is the backup supposed to remain in the
DISCONN state?
see below
Situation
r2 normal peer
r6,r5 -r6 primary r5 backup peer
r2#dp
Peers: state pkts_rx pkts_tx type drops ckts TCP
uptime
 TCP 192.5.3.3 CONNECT 165 165 conf 0 0 0
01:22:40
 TCP 192.5.6.6 CONNECT 18 18 conf 0 0 0
00:08:07
 TCP 192.5.5.5 DISCONN 0 0 conf 0
- -
Total number of connected peers: 2
Total number of connections: 2

r2#r
Building configuration...

Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r2
!
enable secret 5 $1$7Opo$gjBFI7.oa.7FdqrjO/4e8/
!
ip subnet-zero
no ip domain-lookup
ip multicast-routing
ip dvmrp route-limit 20000
ipx routing 0002.0002.0002
!
voice-port 1/0/0
!
voice-port 1/1/0
!
voice-port 1/0/1
!
voice-port 1/1/1
!
d
source-bridge ring-group 100
dlsw local-peer peer-id 192.5.2.2 group 100 border
dlsw remote-peer 0 tcp 192.5.3.3
dlsw remote-peer 0 tcp 192.5.6.6
dlsw remote-peer 0 tcp 192.5.5.5 backup-peer 192.5.6.6
!
!
!
interface Loopback0
 ip address 192.5.2.2 255.255.255.0
 no ip directed-broadcast

r2#

Aaron DuShey

• Next message: Brett: "Re: bridging vlan on ISL trunk"
• Previous message: John Conzone: "bridging vlan on ISL trunk"
• Next in thread: John Conzone: "Re: dlsw backup peers"
• Maybe reply: John Conzone: "Re: dlsw backup peers"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:57 GMT-3