From: Sam Munzani (smunzani@xxxxxxxxx)
Date: Fri Sep 15 2000 - 18:40:36 GMT-3
Ok. My config is attached. I have even captured my
attempt to login to console success and telnet
failure.
Please let me know what am I doing wrong?
Sam
--- Robert LaGrasse <rlagras1@tampabay.rr.com> wrote:
> Post your config Sam.
>
> All you really need to do is put the same login
> authentication method list line in the vty 0 4
> section of the config as you did
> in the line con 0 section. Also be more specific as
> to what problem you're
> having -- are you not authenticating, are you not
> authorizing, etc. Beware the
> default authorization method list.
>
> -B (aka the IT whore)
>
> On Fri, 15 Sep 2000, you wrote:
> > Hi Group,
> >
> > I would like to use CISCO Secure ACS server 2.4
> for
> > NT(TACACS+) to authenticate all my routers and
> > switches for console, telnet and aux ports. I got
> it
> > working for console port but getting some errors
> for
> > telnet users.
> >
> > Is anybody there with a working sample config? I
> will
> > appreciate a working config to guide me where and
> I
> > doing wrong.
> >
> > Thanks in advance,
> >
> > Sam
> >
> > =====
> > Regards,
> >
> > Sam Munzani
> > sam@munzani.com
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:56 GMT-3