From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Fri Sep 15 2000 - 15:59:34 GMT-3
Here's the URL I forgot to include... ;-)
http://www.cisco.com/warp/public/471/75.html#command
Brian
MentorTech wrote:
> Site reference??? Just my brain. :) I think there was a discussion before
> you may be able to find in the archives, but I don't recall any site info
> then either.
>
> 1 <-> 4
> 2 <-> 5
> 3 Not needed
> 4 <-> 1
> 5 <-> 2
> 6 Not needed
> 7 Not needed
> 8 Not needed
>
> Chances are that you will crimp them yourself! They aren't a high-demand
> item...
>
> Scott
>
> ----- Original Message -----
> From: <abdul_rahim@ccsi.canon.com>
> To: "MentorTech" <smorris@mentortech.com>
> Cc: <abdul_rahim@ccsi.canon.com>; <ccielab@groupstudy.com>
> Sent: Friday, September 15, 2000 2:09 PM
> Subject: Re: Help needed on Modular routers 3640 and 2611,Challenge for my
> self and the group
>
> >
> > Can you give me site refrence for it plz
> > Whats the complete pin out
> > Thats what I understood
> >
> > 1<->4
> > 2<->5
> > 3<->?
> > 4<->?
> > 5<->?
> > 6<->?
> > 7<->?
> > 8<->?
> >
> > Do we get these cables from any stores like Fry's or any where else
> > Thanks
> > Abdul Rahim
> >
> >
> >
> >
> > "MentorTech" <smorris@mentortech.com> on 09/15/2000 10:58:21 AM
> >
> > To: <abdul_rahim@ccsi.canon.com>
> > cc: <ccielab@groupstudy.com>
> > Subject: Re: Help needed on Modular routers 3640 and 2611,Challenge for
> my
> > self and the group
> >
> >
> > Pins 1-2 need to cross with pins 4-5 in order to make that work.
> >
> > Enjoy!
> >
> > Scott
> >
> > ----- Original Message -----
> > From: <abdul_rahim@ccsi.canon.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Friday, September 15, 2000 1:47 PM
> > Subject: Help needed on Modular routers 3640 and 2611,Challenge for my
> self
> > and the group
> >
> >
> > >
> > > Hi I have 3 of my routers which are being used for lab purposes ,
> > > They all have Bulit in CSU/DSUs modules on 3640 called 1E2W and 2611
> with
> > > bulit in CSU/DSus as well
> > > can I interconnect those T1 modules via a cross or straight cable
> ???????
> > > with any sort of tricks on configurations so that I can use that
> > importatnt
> > > ports for lab purposes,Even I get a hint I'll be glad to hear it
> > > Its a problem which will
> > > Thanks
> > > Abdul
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:56 GMT-3