From: Sam Munzani (smunzani@xxxxxxxxx)
Date: Thu Sep 14 2000 - 17:57:32 GMT-3
ip policy routing sounds like an option. Use ip local
policy for traffic generated from local router.
Sam
--- Kenneth Sacca <ksacca@cisco.com> wrote:
> Hello,
>
> I'm trying to get my 7206 router to send IP traffic
> destined for
> 172.50.10.10 via the following path
>
> 7206 <--> 3640 <--> FRSwitch <--> 3640 <--> 7206
>
> Since the 7206 router knows that 172.50.10.10 is
> directly connected,
> should I use the offset-list command as the best way
> to force the
> route I desire? I'm running IGRP on this setup.
>
> Thanks for any assistance.
>
>
> +---------------+
> | |
> | 7206 |
> | |
> +---------------+
> 172.50. |s2/1 s2/0|131.180.50.10
> 10.10 | |
> | |
> | |
> | s1/0|131.180.50.5
> | +---------------+
> | | |
> | | 3640 |
> | +---------------+
> | s1/1|131.180.40.5
> | |
> | |
> | s2 |
> | +---------------+
> | | FR Switch |
> | +---------------+
> | | S3
> | |
> | s1/3| 131.180.40.10
> | +---------------+
> | s1/2| |
> +-------| 3640 |
> +---------------+
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:56 GMT-3