From: Sam Munzani (smunzani@xxxxxxxxx)
Date: Thu Sep 14 2000 - 15:41:10 GMT-3
Now the question is.
If unicast is specified, will it stop multicast for
that interface? I mean if you have 4 neighbors and you
want to setup OSPF adj. with only 2 routers, can you
define unicast neighbors specifically?
Sam
--- Andrew <arousch@home.com> wrote:
> OSPF will use mcast on flooding and ucast on
> specific requested updates. I
> am pretty sure that static neighbors will use ucast.
>
> At 11:52 AM 9/14/00 -0400,
> smaljure@cibernetworks.com wrote:
> >Hi group,
> >
> >Lets say we configure neighors explicitly in the
> ospf router process.
> >Does this mean, OSPF will not use multicasting from
> this point onwards and
> >do all communications using the specified
> unicasts?? How about for DR/BDR
> >election process?
> >
> >I am going to try this now and use some debugs. I
> will let u people know
> >the results. Thought I would find out if somebody
> had already spent some
> >time on this
> >
> >Thanks
> >Sanjay Maljure
> >
>
=====
Regards,
Sam Munzani
sam@munzani.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:56 GMT-3